Cockpitbuilders.com
Main => Builders Discussions => Topic started by: jackpilot on June 29, 2016, 12:19:24 PM
Added two Wemac swivel lights for the back wall , lighting up the breaker panels.
High load 24v bulbs were replaced by 12v led equivalents which emit no heat and no heavy wiring.
(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Fimagizer.imageshack.us%2Fv2%2Fxq90%2F924%2F2iR1zM.jpg&hash=ffad1d4ea12f6e4036d32150262a331e13110ad0)
(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Fimagizer.imageshack.us%2Fv2%2Fxq90%2F924%2FeuRsez.jpg&hash=2e59e385608a71d326329f72098bbfc6ac4c219d)
(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Fimagizer.imageshack.us%2Fv2%2Fxq90%2F923%2FUJj76H.jpg&hash=d453320402c2587f368e5a1982c90daa2d5880f8)
Very nice indeed!
I am getting ready to build the back walls to my sim and mount breaker panels. I see that you have a metal frame on each side of the panels. Is that an approximation of what is in the real aircraft or done for your convenience?
I was thinking of just mounting them flat to the vertical panel. I am lucky in that I have a real set of breaker panels and will be using the hinge mechanism to add a further level of realism.
Thanks,
Jim