Print Page - X737 reverse problem

Title: X737 reverse problem
Post by: kurt-olsson on August 26, 2016, 11:27:54 PM

Hi

I have mapped my throttle to the datarefs that control throttle levers and reverser position.

My problem scenario is:

on the ground for start i can advance both throtthle and reverser and the throttle works afterwards again.

But after landing and engaging the reverser, i cannot deactivate the reverser. If i move my throttle they apply thrust for the reverser.

Anyone have this problem?

Title: Re: X737 reverse problem
Post by: MjTom on August 27, 2016, 11:13:08 PM

Hi,

I have the same problem.
The new XP10.50 Beta don´t work with the X737.
Benedict is already informed that we need an update for the x737.

so long, Thomas

Title: Re: X737 reverse problem
Post by: kurt-olsson on August 28, 2016, 12:01:45 AM

Cool, i thought it was a problem with the aircraft, did tests and got the same result with my keyboard. It looks like the reversers wont let go and also will not engage sometimes.

But i will let this go and continue installing the motor controllers instead. Lots of work left with my throttle. :)

Cockpitbuilders.com

Main => General Discussion Board. => Topic started by: kurt-olsson on August 26, 2016, 11:27:54 PM