Print Page - CockpitForYou V3 TQ's and AP disconnect issues

Title: CockpitForYou V3 TQ's and AP disconnect issues
Post by: mariodantas on September 24, 2016, 01:05:22 PM

Hi fellows..

I wish to know is there is someone who bought a V3 TQ from CockpitForYou and have issues with AP disconnecting suddenly ?

Best regards...

Mario DANTAS
France.

Title: Re: CockpitForYou V3 TQ's and AP disconnect issues
Post by: mariodantas on October 02, 2016, 02:10:01 PM

No one ?, everything works good I suppose......

Title: Re: CockpitForYou V3 TQ's and AP disconnect issues
Post by: hirail22 on October 02, 2016, 03:58:03 PM

Hi Mario, if you look over on the prosim forum, hardware section cockpitfor you, there are a few people with the same issues, I beleive its the last few versions of the software that's responsible and people are waiting for an updated version,

Steve

Title: Re: CockpitForYou V3 TQ's and AP disconnect issues
Post by: mariodantas on October 07, 2016, 09:15:33 AM

Ok I don't give a s**** about this CFY TQ driver.

With the AP disconnect randomly issues is not possible to make a flight with no troubles, so I've decided to make my OWN alternative driver for the CFU TQ V3, will show what I've done in one day of work.

Take a look at the attached photo

Cockpitbuilders.com

Main => Builders Discussions => Topic started by: mariodantas on September 24, 2016, 01:05:22 PM