Text only | Text with Images

Cockpitbuilders.com

Main => Builders Discussions => Topic started by: Gallie on May 19, 2017, 09:16:50 AM

Title: Ipeco seat armrest removal
Post by: Gallie on May 19, 2017, 09:16:50 AM
Hello,

Is there anyone that can tell me how to remove the armrests from ipeco seats model 3A090.

Thank you,

Michael
Title: Re: Ipeco seat armrest removal
Post by: jackpilot on May 19, 2017, 09:32:59 AM
Not sure about the IPECO but usually you remove the padded top part (screws below or clips) and you can access the bolt that retains the armrest.
Title: Re: Ipeco seat armrest removal
Post by: mickc on May 19, 2017, 02:36:57 PM
Remove the 3 screws that hold the cover onto the back of the armrest, there is a silver collar between 2 black bushings.  Use a pin punch to knock the roll pin holding the silver collar onto the shaft in towards the inside of the armrest until the pin is clear of the splined shaft, then the whole armrest will slide off the shaft.

Title: Re: Ipeco seat armrest removal
Post by: MjTom on May 19, 2017, 10:24:21 PM
I believe, this SEL-LOK PIN must be knock through.
A picture to Micks explanation.

(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Fwww.bilder-upload.eu%2Fthumb%2F3bb279-1495261896.jpg&hash=ddbfd40cc8854e8e46a8c7ebd2a1e4557251e582) (http://www.bilder-upload.eu/show.php?file=3bb279-1495261896.jpg)

Mick and I have it already done.
(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Fwww.bilder-upload.eu%2Fthumb%2F1ef025-1495262380.jpg&hash=35e67c670c973959f41c7e86035cb676c52b2330) (http://www.bilder-upload.eu/show.php?file=1ef025-1495262380.jpg)

so long, Thomas
Title: Re: Ipeco seat armrest removal
Post by: Gallie on May 20, 2017, 07:05:49 AM
Thank you

Will give it a try next week.

Text only | Text with Images