I saw a 110v inline motor on this site but I lost the info. Does anyone use any fans on their cockpit? If so a link would be great.
Lance
I took the route of having a single large blower below the cockpit floor and routed tubing to each eyeball vent from a collector box on the exhaust side of the blower.
My blower came from Grainger.
Does this work both sides f/o and capt. Do you have the info on it? Do you have them hooked to a relay for the packs?
I have 2 of these.
110V heavy duty (you do not need a Packs.wav) and 4.5 "
Jack Where those enough power flow? Relay would add realism only.
Even too much air !! lol
The wemacs restrict the 4" flow to a small opening (venturi) so you do not need a tornado ! lol
Some leads
https://www.digikey.com/product-detail/en/orion-fans/OA109AP-11-1TB/1053-1001-ND/2620906 (https://www.digikey.com/product-detail/en/orion-fans/OA109AP-11-1TB/1053-1001-ND/2620906)
https://hydrobuilder.com/blauberg-axial-inline-fan-4-intake-exhaust.html?dzid=strands_BLB4UIN (https://hydrobuilder.com/blauberg-axial-inline-fan-4-intake-exhaust.html?dzid=strands_BLB4UIN)
Jack looks great. Are these 12v? Can you send me a pic of the back of the vents for a reference on how to mount them in?
Cheers Lance
If you look at the specs sheet they say it all, Cub feet/minute, voltage amps etc
The round turbine is the easiest to hook up, otherwise you have to make some kind of shroud (which is hidden anyway). On the wemacs side , all depends of the model.
My best guess !
Jack
got it....i was just wondering how you did it. But i can figure it out
Thanks
:D Actually the fans are on a shelve...another project
All figured out, not yet "implanted"
Hence my comments :D
I use these:
http://www.robotshop.com/en/12v-16cfm-33mm-blower-fan.html (http://www.robotshop.com/en/12v-16cfm-33mm-blower-fan.html)
Works for me.
:2cw:
Nick
may i make a suggestion ..bollocks to adding fans and what not it's too much work..why not just get say a small air con unit and plumb your whole deck ..its going to get hot and vent vans as such dont teally cut it ..
My whole hanger is with A/C - but the fun factor of having people sit in the cockpit and feel the air, saying, OMG, then vents actually work!!!
That is why we do it :)
seems my point lost in translation... why muck about with a fan for a vent just to say it works... what i am saying if yiu goi g to add a fan to a couple of vents its pointless ..using my deck as example its fully enclosed .. yes the eyebalks work vut i also added huge amount of air conditioning 5 tonnes if yiu have a deck its going to get hot its peeny wise and pound foolish not to add ac
I agree with you (for once!) BUT
You live in TX
We live (some of us) in a deep-freezer 9 month out of twelve !
:D
Beat that horse to death already lol
Quote from: jackpilot on June 22, 2017, 12:04:28 PM
I agree with you (for once!) BUT
You live in TX
We live (some of us) in a deep-freezer 9 month out of twelve !
:D
I have air conditioner in a sim room, and so far used it only a few times in summer.
In our long winter I do not turn heating on in sim room and the temperature there typically 13-14 degrees. It only gets to 22-23 after 5-6 hours of projectors work.
And summer is too rare here to spend it in a dark room.
:idiot:
Got them today, amazing!
Thank you Nick for the tip.
(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Fimagizer.imageshack.us%2Fv2%2F800x600q90%2F922%2FDiOvRN.jpg&hash=f1c01e17738daac501205f56d79de2bfe993d07f)
Jack do you have a link to eyeball ducts at a fair price?
I did buy the other 110v you had, but I will try and return
to get the 12v ones....They look better and 12v. I can
hook to a relay...