Print Page - Source for HIGH QUALITY slide pots

Title: Source for HIGH QUALITY slide pots
Post by: cavaricooper on July 30, 2017, 07:05:25 AM

Hi-

Looking for high quality slide pots, 30mm throw/slide, 10k with 200k + cycle life. The only ones Digi-Key have are too wide at 16mm. I need 6, about 13mm wide and 50mm long.... replacing the sliders on a PFC TQ inside a Cirrus Console II.

Any suggestions will be most appreciated!

Best- Carl

Title: Re: Source for HIGH QUALITY slide pots
Post by: iwik on July 30, 2017, 11:20:27 AM

Hi,
These are 10mm and 100k cycles. Should be way better than originals. In my
Ga cockpit i have not used anything like this and no dust covers and my pots are
still good after years of use.
Hope it helps.
http://www.potentiometers.com/select_slide.cfm (http://www.potentiometers.com/select_slide.cfm)

Les

Title: Re: Source for HIGH QUALITY slide pots
Post by: Bob Reed on July 30, 2017, 11:48:21 AM

Quote from: iwik on July 30, 2017, 11:20:27 AM
Hi,
These are 10mm and 100k cycles. Should be way better than originals. In my
Ga cockpit i have not used anything like this and no dust covers and my pots are
still good after years of use.
Hope it helps.
http://www.potentiometers.com/select_slide.cfm (http://www.potentiometers.com/select_slide.cfm)

Les

Nice looking Pots, thanks for the link!

Title: Re: Source for HIGH QUALITY slide pots
Post by: cavaricooper on July 31, 2017, 05:52:15 AM

Thanks Les!

C

Cockpitbuilders.com

Main => Builders Discussions => Topic started by: cavaricooper on July 30, 2017, 07:05:25 AM