Print Page - Ok to use only 2 of 4 fastners on crosstube bearing.

Title: Ok to use only 2 of 4 fastners on crosstube bearing.
Post by: kurt-olsson on November 21, 2017, 03:57:19 AM

Hi.

As you might know i am doing some yoke conversion.
Its progressing but i would like some input on one thing.

I personally think its okay to use only the two upper holes to attach a bracket that will support the hole construction, but i would like to know what you think.

I have a picture of the bearing to make it more clear what i am talking about. :)

Title: Re: Ok to use only 2 of 4 fastners on crosstube bearing.
Post by: kurt-olsson on November 22, 2017, 11:28:46 AM

Found another solution, this topic can be removed.

Cockpitbuilders.com

Main => General Discussion Board. => Topic started by: kurt-olsson on November 21, 2017, 03:57:19 AM