Print Page - 737 Tiller Height

Title: 737 Tiller Height
Post by: MistyBlue on April 02, 2018, 11:35:32 AM

Hey folks, I'd like to temporarily mount my 737 FDS tiller for now until I get some interior liners in place. I wanted to see if anyone with a tiller already set up can tell me approximately what the height is from the floor to the center shaft of the tiller wheel.

Thanks!

Title: Re: 737 Tiller Height
Post by: jackpilot on April 02, 2018, 01:02:15 PM

Choose it so that, when the seat is full forward, you feel comfortable steering it

Title: Re: 737 Tiller Height
Post by: Karl737 on April 02, 2018, 11:18:58 PM

Hi Tony,

570 mm, measured off a real nose section.

Cheers,
Karl

Title: Re: 737 Tiller Height
Post by: jackpilot on April 03, 2018, 05:21:23 AM

I had it at the "right" spot to find out that when using it during taxi, my arm was in an awkward position (because of my seat adjustment and probably of my arm length.)
Hence my previous remark, since I moved it it a bit it "steers much better" :D
Just 2¢

Cockpitbuilders.com

Main => General Discussion Board. => Topic started by: MistyBlue on April 02, 2018, 11:35:32 AM