Cockpitbuilders.com
Main => General Discussion Board. => Topic started by: kurt-olsson on July 01, 2018, 10:55:16 AM
Hi
I used my multimeter and have identified all the buttons on my yoke except the left trim up down direction. I can identify a push but cant find the direction.
Can someone please guide me, i have looked at the page on this forum of all the wire info but cant get it to work.
What wires/colors should i use for left trim switch directions?
Not sure of what you mean.
Trim has two rockers. You just need to interface one even if you move them both.
The "direction" (up and down ?) will be assigned to the pair of wires when you interface them.
http://www.cockpitbuilders.com/community/index.php?topic=3424.0 (http://www.cockpitbuilders.com/community/index.php?topic=3424.0)
https://www.flightdecksolutions.com/forum/viewtopic.php?p=8373&sid=41582d716709113564ac4d39a064d402 (https://www.flightdecksolutions.com/forum/viewtopic.php?p=8373&sid=41582d716709113564ac4d39a064d402)
Thanks Jack, i made a breakthrough. Using the red white as common the circuit has to have both trim switches pushed for closing the circuit and give me and input.
In short, i dont have to code this behaviour and as you say, i only need to input one circuit for both rocket pushbuttons.