Cockpitbuilders.com
Main => General Discussion Board. => Topic started by: Sean on August 20, 2010, 11:58:35 PM
I made a post in the wanted section but noticed it didn't get listed in the active thread column, so wanted to highlight it again here.
Quote from: sean nixon on August 20, 2010, 11:50:44 PM
Inspired by Scotts excellent shell build, I'd like to get hold of a set of plans for FDS's old style shell and give it a go. Please let me know if you have a set or know where I might find some.
Thank you
Sean
Me too!!!
Yes, me too !!!! :huh:
I looked long and hard for plans,
eventually, I just took the image off of the front cover of the manual (which I found online), converted it from PDF to DXF, and also to PSD which I projected onto a 4x8 sheet of MDF. I then (had my daughter) traced the image onto the sheet of MDF and cut it out with a jigsaw.
Not the best way, but better than nothing.
Warren
Quote from: fsaviator on August 21, 2010, 08:18:24 PM
I looked long and hard for plans,
eventually, I just took the image off of the front cover of the manual (which I found online), converted it from PDF to DXF, and also to PSD which I projected onto a 4x8 sheet of MDF. I then (had my daughter) traced the image onto the sheet of MDF and cut it out with a jigsaw.
Not the best way, but better than nothing.
Warren
Would you be willing to share the files? :)
Sure, PM with an email address.
Warren
My e-mail is raflyer at yahoo.com pm wouldn't work for some reason, Thanks!!