Real Throttle Dims

[Joe Lavery]

Hi all,
This is a question for all you lucky people with a real 737 throttle, can you tell me the dimensions of the reverser lever. length and thickness of the metal please. Pics would be helpful too.

Thanks
Joe.

[rw]

Hi Joe,

From a 737 CL throttle, but I believe reverser parts are identical to the NG.
\

[Joe Lavery]

Thank you Roel for such a quick response, that's brilliant.

Could I impose on you for one more dim, the actual thickness of the lever, from your images it looks like 2mm, is that correct?

Many thanks again,
joe.

[mickc]

Not stepping on toes, but the thickness of the lever is 3/32" without paint/primer.   The finished thickness of mine is 2.9mm.
Also i measured these on an NG quadrant and mostly they are the same as RW has provided.

[Joe Lavery]

Thanks Mick,
I had planned on 3mm so that's close enough. 

Joe.

[FredK]

Not to get anal about this.....

Using a precision micrometer on my TQ (non NG) for reverser thickness I get 0.0885 inches (2.25 mm).  Exactly uniform as measured in several locations.

Fred K

[Joe Lavery]

Thanks Fred,

All input is gratefully received,  I just have to see if I can live up the the specs.

Joe.

[bernard S]

Not to get anal about this.....

Using a precision micrometer on my TQ (non NG) for reverser thickness I get 0.0885 inches (2.25 mm).  Exactly uniform as measured in several locations.

Fred K

yeah it is  lol.