Those magical wizards at Carenado

[jskibo]

So I was running some FSUIPC captures to figure out why my PFC yoke was dropping out of P3D when Electric trim engaged.
I was sharing files with Pete and he noticed something.
298485 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
298485 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
298485 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
299563 Loading Complete ...
299563 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
299563 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
299563 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
299563 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
299563 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
299563 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
299578 ### Mode is NORMAL
299969 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
299969 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET
299969 *** EVENT: Cntrl= 68065 (0x000109e1), Param= 1 (0x00000001) COM1_8333HZ_MODE_SET

The event was happening multiple times a second.  Its not related to the PFC issue but I figured I would send a sample to the Carenado support desk as it only happens in Carenado and Alabeo aircraft.

This is the quality response I got:

Carenado Support, Jun 14, 2020, 7:16:50 PM GMT-4:
Greetings,

We can not guaranteed full functionality with FSUIPC, as it uses simulator's variables and codes, and we modify those codes in order to get more realistic gauges, systems and behavior. Try disabling FSUIPC.

Regards,


Carenado.


Uhhh, yeah sure thing idiots.

[navymustang]

It is amazing how arrogant that answer was. But just to highlight how some vendors are incredible: I am using a helicopter addon from Cera Sim. I wrote and asked how to program using some of the their LVars. They were so helpful !!!

[jskibo]

Best part is that number (Cntrl= 68065) is beyond the top of Pete's range in FSUIPC so it isn't using it