King Air Altitude Alert system (New Product)

[when acting as a wave]

Hi there all

Due to various requests and discussions that we've had with several customers over the past while, we have now developed a functioning King Air Altitude Alert system.

Below are (hopefully) some attached photos and a Youtube video showing it in operation:

Altitude Alert for King Air simulator

Once the altitude setting has been adjusted, at 1000 feet before the set altitude the beeper will sound three times and the red light illuminates. When you get to 300 feet before the set altitude, the red light will turn off, and once you reach the set altitude the beeper will sound three more times. The same operation applies whether you're climbing to a set altitude or descending.

The 'Push to Cancel' button will cancel the alert system and it won't be re-activated again until another altitude is set.

The units are connected via USB.

This product isn't actually up on our website yet, although it is now actually available for purchase. I can either be contacted directly through this forum or you can contact us through our website for further information.

The price is US$285-00

Any questions, ask away!

Dean

[Bjarne Horsbøl]

Hello Dean !
Look´s fantastic !

For me it is important to know how this "King Air Altitude Alert system.USB unit" works with Aeroworx B200 Super King Air ?

Another BIG request are  plug and play USB units -  "Upper and lower annunciator" working with Aeroworx B200 Super King Air.
I would order it on the spot if it was possible.

Aeroworx B200 Super King Air. is the reason why I want to build !
I would NEVER choose to build a cockpit based on a default King Air.

I have a  Aeroworx B200 test-setup that works very well.
But I need a solution to "Upper and lower annunciator" working with Aeroworx B200 Super King Air.

Best regards
Bjarne Horsbøl

BTW. I am saving up to buy a lot of panel´s 

MERRY CHRISTMAS 

[Trevor Hale]

I know this issue happened to another users post.  Hopefully we can get it back.  Please let me know if this post reappears.

Trev

[Trevor Hale]

The issue is with the OLD Template..  We may need to switch to the new one..

Hello Dean !
Look´s fantastic !

For me it is important to know how this "King Air Altitude Alert system.USB unit" works with Aeroworx B200 Super King Air ?

Another BIG request are  plug and play USB units -  "Upper and lower annunciator" working with Aeroworx B200 Super King Air.
I would order it on the spot if it was possible.

Aeroworx B200 Super King Air. is the reason why I want to build !
I would NEVER choose to build a cockpit based on a default King Air.

I have a  Aeroworx B200 test-setup that works very well.
But I need a solution to "Upper and lower annunciator" working with Aeroworx B200 Super King Air.

Best regards
Bjarne Horsbøl

BTW. I am saving up to buy a lot of panel´s 

MERRY CHRISTMAS 

[Bob Reed]

Well the problem is a 2 fold issue and I think that in the next couple of months there will be a number of answers to this problem.