Source for HIGH QUALITY slide pots

[cavaricooper]

Hi-

Looking for high quality slide pots, 30mm throw/slide, 10k with 200k + cycle life. The only ones Digi-Key have are too wide at 16mm. I need 6, about 13mm wide and 50mm long.... replacing the sliders on a PFC TQ inside a Cirrus Console II.

Any suggestions will be most appreciated!

Best- Carl

[iwik]

Hi,
These are 10mm and 100k cycles. Should be way better than originals. In my
Ga cockpit i have not used anything like this and no dust covers and my pots are
still good after years of use.
Hope it helps.
http://www.potentiometers.com/select_slide.cfm

Les

[Bob Reed]

Hi,
These are 10mm and 100k cycles. Should be way better than originals. In my
Ga cockpit i have not used anything like this and no dust covers and my pots are
still good after years of use.
Hope it helps.
http://www.potentiometers.com/select_slide.cfm

Les

Nice looking Pots, thanks for the link!

[cavaricooper]

Thanks Les!

C