Skip to content

Building a B737 Main Instrument Panel

Started by Aerosim Solutions, February 04, 2010, 05:16:32 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Aerosim Solutions

I thought I would post the MIP pics here instead of the CNC thread!

I was asked for closer detail of the backlight panels so here are a couple of close up shots...







Regards,

Gwyn
Boeing 737NG using Prepar3D v4.5, Prosim737, FDS SYS cards, FDS CDUs, CP Flight MCP Pro & EFIS Pro & Aerosim Solutions hardware of course!<br />Check out my website here -<br />http://www.aerosimsolutions.com.au

jackpilot

What material did you use for the bezels?


Jack

Aerosim Solutions

Quote from: jackpilot on February 04, 2010, 05:23:52 AM
What material did you use for the bezels?

It's 6mm "Trovidur" PVC, great to work with. My current sim panel and console is constructed mainly from PVC. It is easy to bend and mold when heated with a heat gun.

Gwyn
Boeing 737NG using Prepar3D v4.5, Prosim737, FDS SYS cards, FDS CDUs, CP Flight MCP Pro & EFIS Pro & Aerosim Solutions hardware of course!<br />Check out my website here -<br />http://www.aerosimsolutions.com.au

Boeing Skunk Works

I like PVC too. Very easy stuff to work with. All of my instrument panels are made from it except the Collins bezels.
Why yes...I am a rocket scientist...

Boeing, Collins, Gables, Sperry, PPG, Korry, Pacific Scientific, Honeywell