Well.... There is half! lol

[Bob Reed]

Printer is working great. So much so I decided to try my hand at a panel. Found one online but I may end up designing my own. Just need to get rid of the travel lines.

[crazydunc]

Looks good Bob! Bit of sanding and you are sorted!

[Bob Reed]

Ya that is just how it came off the printer. I may re design it but we will see..

[blueskydriver]

Hi Bob,

Are you using Cura, Simply3d or something else? Also, is that an In-fill hatch pattern that's causing the irregular lines and thereby, not making it smoother (or similar looking). And, what size nozzle are you using?

I am just curious, because I'm learning from watching others...

John

[Bob Reed]

Hi Bob,

Are you using Cura, Simply3d or something else? Also, is that an In-fill hatch pattern that's causing the irregular lines and thereby, not making it smoother (or similar looking). And, what size nozzle are you using?

I am just curious, because I'm learning from watching others...

John

I am using Cura 3.2 and for the cross hatch.. I have no idea. It is just how it was sliced. I have a .4 nozzel.

[Trevor Hale]

going to a 100% infil may eliminate most of the lines, but hard to say, and would totally triple print time..